Esxcli

Useful Commands

Get SNMP details

esxcli system snmp get

Example output:

[root@esxh001:~] esxcli system snmp get
   Authentication:
   Communities: snmp#community13
   Enable: true
   Engineid: 00000063000000a100000000
   Hwsrc: indications
   Largestorage: true
   Loglevel: info
   Notraps:
   Port: 161
   Privacy:
   Remoteusers:
   Syscontact:
   Syslocation:
   Targets: log01@162 snmp#community13
   Users:
   V3targets:
[root@esxh001:~]

Testing jumbo frames with vmkping

vmkping -s 8972 -d <ip of iscsi target>

If jumbo frames is enabled you should get ping replies, if not enabled you will see something like:

sendto() failed (Message too long)

Install offline bundle

esxcli software vib install -d /vmfs/volumes/VMStorage/temp/file.zip

Install VIB file

esxcli software vib install -v /vmfs/volumes/VMStorage/temp/file.vib

List network adapters

esxcli network nic list

Example output:

[root@esxh001:~] esxcli network nic list
Name    PCI Device    Driver  Admin Status  Link Status  Speed  Duplex  MAC Address         MTU  Description                                           
------  ------------  ------  ------------  -----------  -----  ------  -----------------  ----  -------------------------------------------------------
vmnic2  0000:09:00.0  tg3     Up            Up            1000  Full    70:e4:22:84:9d:34  1500  Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
vmnic3  0000:09:00.1  tg3     Up            Up            1000  Full    70:e4:22:84:9d:35  1500  Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
[root@esxh001:~]