AnywhereUSB/14

From roonics
Revision as of 10:57, 16 October 2019 by Jlambert (talk | contribs)
Jump to navigation Jump to search

Here are some basic steps to get your AnywhereUSB/14 on the network, the rest of the config can be done via the webUI.

1. Connect a serial cable to the management port

2. Use Putty to make a serial connection to the device and you will get a screen as below: 

#>
Retrieved from "https://www.roonics.com/index.php?title=AnywhereUSB/14&oldid=397"